| |
EXHAUSTS
& FILTERS
Motorcycle Air Filters, Exhausts and Silencers
|
|
|
|
This
page can only show a fraction of our total stock.
There have been many changes over the years to both the air filter
system and the exhaust system.
If the parts you need are not here,
we probably have them and can ensure you get the correct part
for your bike by asking a few questions.
Please contact us with your enquiry and we will be happy to help. |
|
|
| Branch
Pipes -750 Ural. Huge improvement in both fit
and life for your Ural 750. If you currently have air
inlet pipes made up of 2 rubber bends and a metal connector
per Keihin carb, these will fit. Unlike he originals these
fit very well and don't keep falling off the back of the
carb. Sold in pairs only, they are marked left and right. |
| Part
- F238.0213/14 |
£67.20 |
|
|
|
|
| Branch
Pipes - K65 Ural. Connects from the air box on
the older style Ural gearbox M67 and all 650 kick start
models right up to 1997. If the oil bath type air box is
held to the gearbox by a long central bolt and you have
K65/K63 carburetors these are the correct pipes. |
| Part
- F238.0132/33 pair |
£36.00 |
|
|
|
| Air
Filter - Dnepr MT11. Brand new replacement air
filter element to fit the barrel shaped air filter box
common on Dnepr MT11 motorcycles. |
| Part
- F23814/MT11 |
£15.00 |
|
|
|
| Air
Filter - Electric start Ural 650. This is the filter
only not the box. The filter box is there to show which
type of filter it is. The filter fits this box as original
equipment on 650cc electric start Urals from about 1999.
|
| Part
- F23814/650ES |
£18.00 |
|
|
|
Air
Filter - Performance Foam. These can only be
fitted to Ural 750cc bikes using standard Keihin carburetors.
Filters come pre-sprayed and with the correct jets ready
to fit straight on. Gives a noticeable improvement in
the mid range power and allows the removal air box and
branch pipes. We have been testing these in all weather
conditions and they work well.
|
| Part
- F23814/foam |
£52.80 |
|
|
Picture
of
K/S filter
coming soon |
| Air
Filter - 650 oil bath. This filter element can
be washed, dried and reused with fresh oil. Fits all M67
bikes including Soviet knight as well as the kick start
650cc bikes imported under the name Ural Moto. |
| Part
- F23814/oil |
£26.40 |
|
|
|
Breather
Filter. The engine breather tends to make the
original air filter wet in the winter when doing lots
of short journeys. Many people disconnect the engine breather
from the air filter box on Urals and then block the hole
in the air filter box. This leaves the problem of what
to do with the engine breather pipe. It can just be run
down to breath on to the ground. A much better solution
is to fit this small filter. These are also a great idea
if you are planning to fit K&N or Foam filters.
|
| Part
- F20329/filter |
£16.80 |
|
|
|
| Air
Filter - K&N Ural 750. This filter is a direct
replacement for the original filter fitted by Ural to the
flat oval filter box. It replaces either the original paper
or blue mesh air filter. It comes oiled and ready to fit.
These filters are legendary amongst car tuners for their
high flow and excellent engine protection in the most extreme
environments. They can be washed, oiled and reused for up
to one million miles, so you will only need one. Because
these filters flow more air we supply them with new main
jets for Keihin carburetors. |
| Part
- F23814/K&N |
£52.80 |
|
|
|
| Alloy
Exhaust Fins - Ural. Fits all Ural 650cc and
750cc push in exhaust systems. supplied with stainless
steel fastening bolt. Simply clamps on. These are commonly
sold as "cooling fins", they certainly improve
the look of the exhaust and cylinder head but probably
do very little to increase cooling. Please note, these
are NOT the factory fins. Our ones fit the bike without
the need to file metal off them. These do not fit the
bolted on exhaust fitted to all Urals from 2006. |
| Part
- F25313 |
£24.00 |
|
|
|
Front
Pipes - Dnepr. These have been near impossible
to get for a few years now. We have a semi-reliable source,
so we try to hold a few pairs in stock but be prepared for
a short wait if we are out of stock when you phone. They
are original USSR quality so expect the chrome to be less
perfect. In fact a lot less than perfect.
|
| Part
- F23403/D pair |
£60.00 |
|
|
|
| Exhaust
Screw Flange - Dnepr. These are sometimes split
or damaged on older bikes when corrosion gets into the
threads. They are a soft alloy so if you are having trouble
removing your old ones, don't just keep applying more
pressure. Soak them in a good release agent such as plus
gas for several nights first, then use a little local
heat from a blow lamp before trying to get them off. We
advise using plenty of copper grease when fitting the
new ones. |
| Part
- F23410/D |
£16.80 |
|
|
|
Silencer
- Universal. Universal 70cm silencer. Inlet comes
with collars to fit any size from 35mm to 41 mm down pipe.
15cm steel mounting plate is attached to a slide bar starting
24 cm from inlet. A small amount of work will allow them
to fit most bikes right or left side. We have used these
to replace Dnepr silencers.
|
| Part
- F23401/70cm |
£52.80 |
|
|
|
Silencer
- Custom. 20 inch cone custom exhaust, these
can be fitted with a little fiddling to almost any bike
with an exhaust pipe from 38mm to 45 mm diameter. but
as we said they do NOT go straight on, you may need to
make brackets etc. You may need to re-jet and you should
be aware that they are "not for road use". However
they do sound very very nice when fitted to a single or
twin. Not as load as the shorty.
|
| Part
- F23401/custom |
£45.60 |
|
|
|
| Silencer
- Shorty. 15 inch tapered custom exhaust, these
can be fitted with a little fiddling to almost any bike
with an exhaust pipe from 38mm to 45 mm diameter. but as
we said they do NOT go straight on, you may need to make
brackets etc. You may need to re-jet and you should be aware
that they are "not for road use". However they
do sound very very nice when fitted to a single or twin.
|
| Part
- F23401/short |
£40.80 |
|
|
|
Exhaust
Baffles. These are 20 cm long but can be cut
down to suit the level of back pressure you require. The
wider part bolts through your silencer with a 6 mm bolt
provided. They do not fit the silencers we sell, but they
do fit a lot of straight through silencers.
Threes sizes 35mm, 41mm, or 47mm
diameter |
| Part
- F23418/35mm |
£15.00 |
| Part
- F23418/41mm |
£15.00 |
| Part
- F23418/47mm |
£15.00 |
|
|
|
UK
Delivery Charges - From £7.50
Prices are per delivery not per item.
Mixed orders of many parts will normally be charged
as one large item even if it arrives in several small
boxes.
|
Small
- Small items up to about 5 kg - Max size approximately
30cm x 20cm x 12cm
Delivered to England, Scotland & Wales excluding
Scottish Highlands and Islands
|
£7.50 |
Large
- Items greater than 5kg
but less than 20kg
Delivered to England, Scotland & Wales excluding
Scottish Highlands and Islands
|
£15.00 |
Highlands
- Sorry there is no small item price for the
highlands so all deliveries up to 20 kg are one rate.
Delivered to AB30-38, AB44-56, FK17-99, G83, IV1-28,
IV30-32, IV33-39, IV52-54, IV63, KW1-14, PA21-33, PA34-40,
PH18-26, PH30, PH31-41, PH49-50
|
£15.00 |
|
|
|
